Clean and dry.
Remove grease, dust and loose residue. Let the wall dry completely.
Preview your wall update
One marble finish. Four room transformations.
Choose a room, then drag across the image to compare the wall before and after.
Choose a room
Kitchen · Before & after
2.0mm
Rigid aluminum composite structure
30 × 30cm
Individual square wall tile
0.97 sq. ft.
Approximate coverage per tile
A more substantial wall finish
Not a thin film decal.
The flat 2.0mm construction combines a matte PVC marble face, an aluminum composite core and an acrylic peel-and-stick backing.
-
01Matte marble face
Low-glare printed veining for a more natural wall look. -
02Aluminum composite core
A rigid structure with a clean, visible edge. -
03Acrylic adhesive backing
Align carefully, then press from the center toward the edges.
Everyday care
Made for normal kitchen splashes and wipe-downs.
The matte PVC face is water-resistant and oil-resistant for routine wall splashes. Wipe with a soft cloth and mild cleaner.
-
01Wipe gently
Use a soft damp cloth for routine marks. -
02Protect the seams
Avoid standing water and prolonged soaking. -
03Skip abrasive cleaners
Harsh pads and solvents may damage the matte print.
Installation
Four measured steps to cleaner seams.
Plan the first row before exposing the adhesive. A straight start makes the rest of the wall easier to align.
Dry-fit the first row.
Mark a straight reference line and plan corners, outlets and edge cuts.
Peel a small section.
Expose only enough backing to position the tile without losing control.
Seal center to edge.
Press firmly across the face, perimeter and every finished seam.
Packaging previewUpload the selected finish photo to replace this placeholder.
Packed to arrive flat
Choose the finish. See the pack.
One packaging image is shown at a time. Tap a finish below to replace that image with its matching packed product.
Select a finishProtected for transit. Edge protection and corner guards help the rigid sheets arrive flat and ready to install.
Check the wall first
A reliable result starts underneath.
Adhesion depends on the condition of the wall, paint and existing tile. Test one hidden area before completing a large project.
Works best on
- Clean, dry and smooth painted walls
- Firm, flat existing backsplash tile
- Prepared cement or plaster after dust removal
- Indoor accent walls away from direct spray
Repair first or avoid
- Mold, active dampness or condensation
- Peeling paint, powdery or loose surfaces
- Loose tiles, deep cracks or strong texture
- Shower interiors and standing-water areas
Size and coverage
Measure once, then allow for cuts.
Each tile covers approximately 0.97 sq. ft. The estimate below includes 10% extra for trimming and alignment.
Coverage estimator
24.0 sq. ft. wall area
20 Pack + 10 Pack
Estimate only. Confirm openings, corners, pattern direction and the pack options shown in the product selector.
Product details
| Product type | Individual self-adhesive faux marble wall tile |
|---|---|
| Tile size | 30 × 30cm / 11.8 × 11.8in |
| Thickness | Approximately 2.0mm / 0.08in |
| Coverage | Approximately 0.09m² / 0.97 sq. ft. per tile |
| Construction | Matte PVC face, aluminum composite core and acrylic adhesive backing |
| Recommended use | Prepared indoor walls, kitchen backsplash, dry vanity wall and accent wall |
| Care | Wipe gently; avoid abrasive cleaners, direct shower spray and standing water |
Good to know
Questions, answered.
Can I install the tiles over an existing backsplash?
Yes, when the existing tiles are firmly attached, clean, dry and reasonably flat. Fill deep grout lines or uneven areas first so they do not show through the finished surface.
Can I use them inside a shower?
No. This is a decorative wall covering, not a waterproofing system. Avoid direct shower spray, standing water and areas with constant steam or condensation.
Will removal damage the original wall?
Removal depends on the paint, primer and wall condition. Warm the adhesive, peel slowly and test one hidden tile before completing a large installation.
Can I reposition a tile during installation?
Plan and align before pressing fully. Repositioning may reduce adhesive strength, so expose only a small section of backing until the tile is straight.
How many tiles should I order?
Measure wall width by height, divide by approximately 0.97 sq. ft. per tile, then add about 10% for cuts and waste. For one project, order the full quantity together to reduce the chance of batch color variation.
Give the wall a cleaner marble finish.
Choose the marble pattern and pack quantity above, then measure the project before ordering.
Choose pattern and pack-
Rigid 2mm Faux Marble Wall Tiles
$59.23 USD -
Self-Adhesive Faux Marble Tile Wall Sticker
$59.43 USD -
Peel & Stick Marble Wall Panel Roll
$45.43 USD -
Marble Peel & Stick Wall Covering Roll
$45.43 USD -
Peel & Stick Marble-Look Floor Tiles
$52.97 USD -
Peel & Stick Wood-Grain Floor Tiles
$53.97 USD -
-
Botanical Static Cling Window Film for Glass
$39.99 USD -
