Ürün bilgisine atla
1 / 5

Peel & Stick Fluted Wall Panel Roll

Peel & Stick Fluted Wall Panel Roll

MSRP: $65.23
SAVE $16.00
Now Price:
$49.23
Color
⏰Flash Sale Today Only!
Adet
Tüm ayrıntıları görüntüle

Texture in one continuous roll

Peel & Stick Fluted Wall Panel Roll

Add warm wood character and a dimensional slat look to smooth indoor walls. The flexible PVC panel arrives rolled with its adhesive backing ready to install.

40 cm × 3 mOne fixed-size roll covers approximately 1.2 m² / 12.9 sq. ft. before trimming.
Roll Size & Coverage Guide40 CM WIDTH
Roll size40 cm × 3 m
Imperial size15.7 in × 9.84 ft
Coverage1.2 m²
Coverage12.9 sq. ft.
Each quantity is one separate 3 m roll. Add 10% for cuts, corners, and alignment.
Enter the wall width and height to estimate how many 3 m rolls to order.
Estimated area: 64.0 sq. ft.6 rollsIncludes 10% extra material
Fixed specification: 40 cm wide × 3 m long × 2.8 mm thickPlanning note: check roll direction before cutting.

A faster room refresh

Clean lines. Noticeable depth. No complicated framework.

The fluted face adds visual rhythm to a wall, while the flexible roll format is easier to measure and handle than rigid decorative panels.

01

3D fluted texture

Raised channels create a slatted-wall effect with visible depth.

02

Self-adhesive

Peel-and-stick backing supports installation on clean, smooth walls.

03

Flexible roll

The 3 m length helps cover taller sections with fewer horizontal joins.

04

Wipeable PVC

The surface can be gently cleaned with a soft, damp cloth.

Designed for interior walls

Turn a plain wall into a focused feature.

Use the vertical channels to add height and structure behind a TV, bed, desk, dining area, entryway, or commercial display.

  • 01
    Keep the direction consistentLay out each strip before peeling so the grooves and wood grain run the same way.
  • 02
    Work from a level guideMark the first edge carefully because every following strip aligns to it.
  • 03
    Press graduallyPeel a short section at a time and smooth outward to reduce trapped air.

The product at a glance

Flexible PVC with a 2.8 mm profile.

This is a decorative self-adhesive wall covering, not rigid timber cladding. Its raised PVC surface adds light cushioning and a dimensional finish.

  • 01
    Wood-look faceSix selected finishes coordinate with light, gray, brown, black, and natural interiors.
  • 02
    Raised groove profileThe supplier lists a finished thickness of approximately 2.8 mm.
  • 03
    Adhesive backingMade for direct application to a properly prepared, flat indoor wall.

Six selected finishes

From quiet neutrals to deeper contrast.

Color can vary by screen and lighting. Order enough rolls together for one project to reduce potential batch variation.

White Peach OakMW601
Light AshMW602
Deep AshMW603
Dark WalnutMW604
Black GoldMW606
Natural OakMW607

Surface preparation matters

Four steps to a cleaner result.

  • 01
    CleanRemove dust, grease, moisture, loose paint, and raised debris.
  • 02
    MeasurePlan seams and cut each strip with a small trimming allowance.
  • 03
    Peel and alignExpose the liner gradually while keeping the first edge vertical.
  • 04
    Press and trimSmooth firmly, finish edges, and cut openings with a sharp blade.

Product details

Everything at a glance.

Product type Self-adhesive 3D fluted decorative wall panel roll
Material PVC
Roll size 40 cm × 3 m (15.7 in × 9.84 ft)
Thickness Approximately 2.8 mm
Coverage per roll 1.2 m² / 12.9 sq. ft. before trimming allowance
Installation Self-adhesive peel-and-stick backing
Surface finish Raised fluted profile with wood-look texture
Selected colors White Peach Oak, Light Ash, Deep Ash, Dark Walnut, Black Gold, Natural Oak
Recommended surface Clean, dry, smooth, flat indoor walls
Suitable spaces Bedroom, study, office, dining area, entryway, balcony wall, rental refresh, and commercial interior
Care Wipe gently with a soft, damp cloth
Roll delivery: Each quantity ordered is one separate 40 cm × 3 m roll. Multiple quantities are not guaranteed to arrive as one continuous roll. Buy enough for the full project at one time where possible.

Good to know

Questions, answered.

How many rolls do I need?

Each roll covers about 12.9 sq. ft. before cutting. Enter the wall dimensions in the calculator, which includes 10% extra for trimming and alignment.

Are several quantities joined into one roll?

No. Each quantity is supplied as one separate 3 m roll.

Can it be installed on textured walls?

No. Uneven texture, dust, loose paint, grease, and moisture can weaken adhesion and make the seams uneven.

Is this solid wood?

No. It is a flexible PVC decorative wall covering with a wood-look surface and raised fluted profile.

Can it be used near heat or standing water?

Keep it away from open flame, high-heat areas, constantly wet surfaces, and places where water can enter behind the edges.

Give the wall more depth.

Choose a finish, measure the space, and refresh it roll by roll.

Peel & Stick Fluted Wall Panel Roll · 40 cm × 3 m · 2.8 mm