Self-Adhesive Wood Grain Floor Tiles
Waterproof · Moisture-Proof · Wear-Resistant
Realistic wood texture with a thickened 1.5 mm cushioned core. No glue, no tools, no installer — transform your bedroom, living room, floor or wall in a single afternoon.
Shop Now- Waterproof & Moisture-Proof
- Extra Thick 1.5 mm
- No Tools Needed
- Floors & Walls
100% Waterproof
PVC vinyl surface resists spills, moisture and daily splashes. Wipes clean with a damp cloth.
Scratch & Wear Resistant
Thickened 1.5 mm surface with a protective wear layer. Stands up to foot traffic, furniture and pets.
Peel & Stick
Strong self-adhesive backing. Just peel the release film and press down — no glue, no nails, no mess.
Floor & Wall Versatile
One product, two surfaces. Use it on floors, walls, stairs and even cabinets for a quick makeover.
A Fresh Look for Any Room — Without the Renovation Hassle
Give your space a warm, natural wood look with these peel-and-stick wood grain tiles. Whether you're covering an old floor, refreshing a rental apartment, or adding a rustic accent wall, the realistic wood texture and rich color options blend seamlessly into modern, farmhouse, Scandinavian or industrial interiors.
Each tile is built with a multi-layer construction: a durable PVC wear layer on top, a high-definition wood grain print, a shock-absorbing IXPE foam core, and a reflective aluminized film underneath. The result is a surface that feels solid underfoot, stays quiet when you walk on it, and holds up to everyday life.
- Instant transformation — cover concrete, old tile or worn vinyl in minutes
- Renter-friendly — removable on smooth, sealed surfaces
- Low maintenance — a quick wipe keeps it looking new
- Affordable upgrade — a fraction of the cost of real hardwood
What's Inside Every Tile?
Five bonded layers work together to deliver a surface that looks like wood, feels cushioned, and stays flat over time.
PVC Wear Layer
Realistic wood grain texture. Scratch-resistant, waterproof and easy to clean.
PVC + IXPE Foam
Adds thickness, cushions every footstep and reduces noise.
Aluminized Film
Reflects heat and blocks moisture from below — a built-in barrier.
Hot-Melt Adhesive
Strong, long-lasting bond. No extra glue required.
Release Film
Protects the adhesive until you are ready to install.
The IXPE foam core is what sets this tile apart from ordinary peel-and-stick vinyl. It's a closed-cell foam that won't absorb water, adds a soft cushion underfoot, and absorbs sound — so footsteps and furniture movement are noticeably quieter. The aluminized film backing acts as a built-in moisture barrier, protecting the adhesive from damp subfloors.
Product Specifications
Everything you need to know before you order.
| Product Name | Self-Adhesive Wood Grain Floor & Wall Tile |
|---|---|
| Material | PVC + IXPE Foam + Aluminized Film + Hot-Melt Adhesive + Release Film |
| Texture | Realistic wood grain |
| Thickness | 1.5 mm |
| Tile Size | 30 cm × 30 cm (11.8" × 11.8") |
| Coverage per Tile | 0.09 m² (approx. 0.97 sq. ft) |
| Available Colors | Light Gray · Oak · Cherry · Coffee |
| Installation | Peel and stick — no tools required |
| Suitable Surfaces | Floor and wall |
| Cleaning | Wipe with a damp cloth or mild cleaner |
Choose Your Wood Tone
Four versatile wood grains — from cool and modern to deep and cozy.
Light Gray Wood
Cool and modern — pairs beautifully with white walls and minimalist furniture.
Oak Wood
Warm and natural — the classic choice for living rooms and bedrooms.
Cherry Wood
Rich reddish-brown — adds depth and a traditional feel to any space.
Coffee Wood
Deep and moody — ideal for studies, accent walls and cozy corners.
Other sizes and custom colors available — contact us for details.
Install It Yourself in 4 Simple Steps
No experience needed. If you can use scissors, you can install these tiles.
Prepare the Surface
Make sure the surface is clean, dry, flat and free of dust, grease or wax. Fill cracks and let them dry completely.
Plan Your Layout
Dry-fit the tiles without removing the backing to find the best pattern. Starting from the center usually gives the most balanced look.
Peel and Stick
Remove the release film and press the tile firmly onto the surface, smoothing outward from one corner to push out air bubbles.
Trim and Finish
Cut edges and corners to size with a utility knife or scissors, then press down firmly along all edges for a secure seal.
Pro tips for the best result
- Let the tiles sit in the room for 24 hours before installation so they adjust to room temperature.
- For wall application, make sure the wall is painted, tiled or otherwise sealed — bare drywall may need a primer first.
- When installing over concrete, apply a latex primer to improve adhesion.
Where Can You Use It?
These tiles bond best to smooth, clean, dry and structurally sound surfaces.
Important: If your surface has any of the four issues above, you must repair and treat it before installation. Installing directly on these surfaces will affect adhesion and long-term performance.
Where Will You Use Yours?
From a full room renovation to a small weekend refresh — one product covers it all.
Living Room
Cover worn flooring for an instant refresh before guests arrive.
Bedroom
Warm and quiet underfoot — the IXPE foam softens every step.
Kitchen
Waterproof surface handles spills and splashes without warping.
Bathroom
Moisture-resistant construction stands up to everyday humidity.
Home Office
A clean, professional-looking backdrop for video calls.
Stairs & Hallways
The durable wear layer handles high-traffic areas with ease.
Frequently Asked Questions
Still deciding? These are the questions buyers ask us most.
Do I need any special tools or glue?
No. The tiles come with a strong self-adhesive backing. All you need is a clean surface, a utility knife or scissors for trimming, and your hands.
Can I install these over existing tile or vinyl?
Yes, as long as the existing surface is flat, clean and well-bonded. Avoid installing over loose, uneven or damaged flooring.
How do I clean them?
A damp cloth or mop with mild soap is all you need. Avoid abrasive cleaners or scrubbing pads that could dull the surface.
Can I use them on walls?
Absolutely. They work on painted walls, tile walls, glass, metal and most smooth surfaces. For best results on walls, ensure the surface is clean and dry.
How many tiles do I need for my room?
Each tile covers 0.09 m² (about 0.97 sq. ft). Measure your room's length × width in meters, then divide by 0.09. We recommend ordering 5–10% extra for cuts and future replacements.
Are they removable?
Yes — on smooth, sealed surfaces they can be peeled off. They may not be reusable after removal, and removal from unsealed surfaces may damage the underlying material. Always test a small area first.
What You'll Receive
- Selected quantity of 30 cm × 30 cm wood grain tiles
- Installation guide card
- Protective packaging to prevent transit damage
Buy with Confidence
- Every tile inspected before shipping
- Responsive support — replies within 24 hours
- Fast dispatch within 1–3 business days
- Bulk & custom sizes available on request
-
Halloween Scary Finger Candles – 5 Pack
$29.43 USD -
-
Kids Halloween Pumpkin Face Overalls
$29.23 USD -
Halloween LED Silhouette Wall Light Stickers
$29.99 USD
