Embossed brick texture
Raised detailing gives plain walls a more dimensional surface.
Texture, comfort, and a faster wall refresh
Peel & Stick 3D Brick Foam Wall Panels
Add a dimensional brick look to smooth indoor walls with lightweight XPE foam panels and a ready-applied adhesive backing.
35 × 38.5 cmAvailable in 10-piece and 20-piece packs, with each panel covering approximately 0.135 m² / 1.45 sq. ft.
Panel Size & Coverage Guide10 OR 20 PIECES
Panel size35 × 38.5 cm
Imperial size13.8 × 15.2 in
10-piece coverage1.35 m² / 14.5 sq. ft.
20-piece coverage2.70 m² / 29.0 sq. ft.
Coverage is calculated before trimming. Add approximately 10% for cuts, corners, and pattern alignment.
Enter the wall width and height to estimate a practical pack combination.
Estimated area: 64.0 sq. ft.2 × 20-piece + 1 × 10-piece50 pieces total · includes 10% extra
Fixed panel specification: 35 × 38.5 cm × 3 mmPack options: 10 pieces or 20 pieces.
A softer dimensional finish
Brick texture without rigid masonry panels.
The embossed face creates visible depth, while the XPE foam body stays lightweight and adds a lightly cushioned feel to the finished wall.
Self-adhesive backing
Peel-and-stick construction supports direct installation on prepared walls.
Lightweight XPE foam
Flexible 3 mm foam is easier to handle and trim than rigid cladding.
Wipeable surface
The water-resistant face can be gently cleaned with a soft damp cloth.
Built for quick interior updates
One panel size. Two useful pack quantities.
Use smaller packs for a focused accent or combine multiple packs for a larger wall. The repeating brick layout helps adjoining panels read as one continuous surface.
-
01
Dry-plan before peelingArrange the first row and check how the brick edges meet before exposing adhesive.
-
02
Start from a level edgeA straight first panel makes every following row easier to align.
-
03
Order enough togetherBuy the full project quantity at one time to reduce potential color variation between batches.
The product at a glance
Flexible XPE foam with a 3 mm profile.
This is a decorative foam wall panel, not ceramic, stone, or structural brick. Its embossed surface and cushioned body are designed for visual wall refreshes.
-
01
XPE foam constructionThe supplier specifies an overall thickness of approximately 3 mm.
-
02
Adhesive already appliedRemove the release liner gradually and press onto a clean, smooth, dry wall.
-
03
Approx. 50 g per panelSupplier packing data lists approximately 50 g for each individual panel.
Six verified colors
Choose soft neutrals, warmer tones, or stronger contrast.
Color may vary by screen and lighting. The supplier page currently lists the six finishes below.
BlackBLK
Light BrownLBR
PinkPNK
BrickBRK
Gray BrickGBR
GrayGRY
10-Piece PackApprox. 1.35 m² / 14.5 sq. ft. before trimming
20-Piece PackApprox. 2.70 m² / 29.0 sq. ft. before trimming
Surface preparation matters
Four steps to a cleaner result.
-
01
CleanRemove dust, grease, dampness, loose paint, wallpaper, and raised debris.
-
02
Measure and planMark a level starting line and dry-fit the first row before cutting.
-
03
Peel and alignExpose part of the liner, position the panel, then peel gradually while pressing.
-
04
Press and trimSmooth the full surface, press seams firmly, and trim edges with a sharp blade.
Product details
Everything at a glance.
| Product type | Self-adhesive embossed 3D brick foam wall panel |
|---|---|
| Material | XPE foam |
| Panel size | 35 × 38.5 cm (13.8 × 15.2 in) |
| Thickness | Approximately 3 mm (0.12 in) |
| Coverage per panel | Approximately 0.135 m² / 1.45 sq. ft. before trimming |
| Pack options | 10 pieces or 20 pieces |
| Installation | Self-adhesive peel-and-stick backing |
| Pattern | Embossed brick pattern |
| Available colors | Black, Light Brown, Pink, Brick, Gray Brick, Gray |
| Recommended surface | Clean, dry, smooth, flat indoor walls |
| Care | Wipe gently with a soft damp cloth |
Important: Measure the actual wall and add approximately 10% for cuts and alignment. This decorative foam product is not fireproof, structural, or a substitute for certified impact protection. Keep it away from open flame, high heat, standing water, and persistently damp surfaces.
Good to know
Questions, answered.
How many panels do I need?
Each panel covers about 1.45 sq. ft. before cutting. Use the calculator above for a pack recommendation that includes approximately 10% extra.
Can I order individual panels?
This listing is planned for 10-piece and 20-piece packs only.
Can it be installed over textured walls?
It is intended for smooth, clean, dry, flat walls. Heavy texture, dust, grease, moisture, wallpaper, or loose paint can weaken adhesion and make seams uneven.
Is it real brick?
No. It is a lightweight XPE foam decorative panel with an embossed brick appearance.
Is the surface waterproof?
The face is water resistant for routine wiping, but it should not be installed where standing water or moisture can enter behind the panels.
Can panels be removed without damage?
Adhesive performance and removal results depend on the wall finish, age, and preparation. Test one panel in an inconspicuous area first, especially on painted or rental walls.
Give a plain wall more dimension.
Choose a color, measure the space, and select the pack combination that fits.
-
Halloween Scary Finger Candles – 5 Pack
$29.43 USD -
-
Kids Halloween Pumpkin Face Overalls
$29.23 USD
