1 9

Peel & Stick 3D Brick Foam Wall Panels

Peel & Stick 3D Brick Foam Wall Panels

MSRP: $49.99
SAVE $10.56
Now Price:
$39.43
Color
⏰Flash Sale Today Only!
Afficher tous les détails

Texture, comfort, and a faster wall refresh

Peel & Stick 3D Brick Foam Wall Panels

Add a dimensional brick look to smooth indoor walls with lightweight XPE foam panels and a ready-applied adhesive backing.

35 × 38.5 cmAvailable in 10-piece and 20-piece packs, with each panel covering approximately 0.135 m² / 1.45 sq. ft.
White 3D brick foam wall panels in a bedroom
Panel Size & Coverage Guide10 OR 20 PIECES
Panel size35 × 38.5 cm
Imperial size13.8 × 15.2 in
10-piece coverage1.35 m² / 14.5 sq. ft.
20-piece coverage2.70 m² / 29.0 sq. ft.
Coverage is calculated before trimming. Add approximately 10% for cuts, corners, and pattern alignment.
Enter the wall width and height to estimate a practical pack combination.
Estimated area: 64.0 sq. ft.2 × 20-piece + 1 × 10-piece50 pieces total · includes 10% extra
Fixed panel specification: 35 × 38.5 cm × 3 mmPack options: 10 pieces or 20 pieces.

A softer dimensional finish

Brick texture without rigid masonry panels.

The embossed face creates visible depth, while the XPE foam body stays lightweight and adds a lightly cushioned feel to the finished wall.

01

Embossed brick texture

Raised detailing gives plain walls a more dimensional surface.

02

Self-adhesive backing

Peel-and-stick construction supports direct installation on prepared walls.

03

Lightweight XPE foam

Flexible 3 mm foam is easier to handle and trim than rigid cladding.

04

Wipeable surface

The water-resistant face can be gently cleaned with a soft damp cloth.

Built for quick interior updates

One panel size. Two useful pack quantities.

Use smaller packs for a focused accent or combine multiple packs for a larger wall. The repeating brick layout helps adjoining panels read as one continuous surface.

  • 01
    Dry-plan before peelingArrange the first row and check how the brick edges meet before exposing adhesive.
  • 02
    Start from a level edgeA straight first panel makes every following row easier to align.
  • 03
    Order enough togetherBuy the full project quantity at one time to reduce potential color variation between batches.

The product at a glance

Flexible XPE foam with a 3 mm profile.

This is a decorative foam wall panel, not ceramic, stone, or structural brick. Its embossed surface and cushioned body are designed for visual wall refreshes.

  • 01
    XPE foam constructionThe supplier specifies an overall thickness of approximately 3 mm.
  • 02
    Adhesive already appliedRemove the release liner gradually and press onto a clean, smooth, dry wall.
  • 03
    Approx. 50 g per panelSupplier packing data lists approximately 50 g for each individual panel.

Six verified colors

Choose soft neutrals, warmer tones, or stronger contrast.

Color may vary by screen and lighting. The supplier page currently lists the six finishes below.

BlackBLK
Light BrownLBR
PinkPNK
BrickBRK
Gray BrickGBR
GrayGRY
10-Piece PackApprox. 1.35 m² / 14.5 sq. ft. before trimming
20-Piece PackApprox. 2.70 m² / 29.0 sq. ft. before trimming

Surface preparation matters

Four steps to a cleaner result.

  • 01
    CleanRemove dust, grease, dampness, loose paint, wallpaper, and raised debris.
  • 02
    Measure and planMark a level starting line and dry-fit the first row before cutting.
  • 03
    Peel and alignExpose part of the liner, position the panel, then peel gradually while pressing.
  • 04
    Press and trimSmooth the full surface, press seams firmly, and trim edges with a sharp blade.

Product details

Everything at a glance.

Product type Self-adhesive embossed 3D brick foam wall panel
Material XPE foam
Panel size 35 × 38.5 cm (13.8 × 15.2 in)
Thickness Approximately 3 mm (0.12 in)
Coverage per panel Approximately 0.135 m² / 1.45 sq. ft. before trimming
Pack options 10 pieces or 20 pieces
Installation Self-adhesive peel-and-stick backing
Pattern Embossed brick pattern
Available colors Black, Light Brown, Pink, Brick, Gray Brick, Gray
Recommended surface Clean, dry, smooth, flat indoor walls
Care Wipe gently with a soft damp cloth
Important: Measure the actual wall and add approximately 10% for cuts and alignment. This decorative foam product is not fireproof, structural, or a substitute for certified impact protection. Keep it away from open flame, high heat, standing water, and persistently damp surfaces.

Good to know

Questions, answered.

How many panels do I need?

Each panel covers about 1.45 sq. ft. before cutting. Use the calculator above for a pack recommendation that includes approximately 10% extra.

Can I order individual panels?

This listing is planned for 10-piece and 20-piece packs only.

Can it be installed over textured walls?

It is intended for smooth, clean, dry, flat walls. Heavy texture, dust, grease, moisture, wallpaper, or loose paint can weaken adhesion and make seams uneven.

Is it real brick?

No. It is a lightweight XPE foam decorative panel with an embossed brick appearance.

Is the surface waterproof?

The face is water resistant for routine wiping, but it should not be installed where standing water or moisture can enter behind the panels.

Can panels be removed without damage?

Adhesive performance and removal results depend on the wall finish, age, and preparation. Test one panel in an inconspicuous area first, especially on painted or rental walls.

Give a plain wall more dimension.

Choose a color, measure the space, and select the pack combination that fits.

Peel & Stick 3D Brick Foam Wall Panels · 35 × 38.5 cm · 3 mm

 

Customer Favorites

1 6